XADO 10W-60 4T MA is a synthetic engine oil for powerful four-stroke motorcycles and quad bikes that are ridden hard. It carries Revitalizant, our technology that protects and restores the metal inside your engine as you ride, and it is safe for wet clutches.

Some engines are built to be pushed. They rev high, run hot and are asked for full power again and again, whether that is on a track day, a rally stage, a sandy trail or a long fast run to the coast. Heat is what beats an ordinary oil in that kind of riding. It thins out, the protective film between the moving parts breaks, and metal starts to meet metal.

This oil is made so that does not happen. Its extra-thick formula forms a very strong oil film that holds at extreme temperatures and engine speeds. It evaporates slowly, so the level stays steady even after hours of hard use. And Revitalizant builds a ceramic-metal layer on the parts under the most stress, which evens out compression and gives you more power and sharper acceleration.

You ride the bike the way it was meant to be ridden. The oil takes care of the engine.

Why riders choose it

It holds its protection at sustained high revs and under heavy heat. Gear changes stay smooth and the clutch bites cleanly, because it meets the JASO MA motorcycle standard for wet clutches. It burns off very little, so you top up less often. It keeps engine parts clean and guards against corrosion. And it improves compression, power and pick-up.

Made for bikes like yours

Enduro and adventure bikes that call for a 10W-60, including many KTM and Husqvarna four-stroke models. Sport bikes used on track days. Rally and motocross bikes. Sport quad bikes and ATVs. Big air-cooled engines that run hot in slow traffic.

This is a specialist oil. Everyday commuter bikes and scooters are better served by our XADO 10W-40 4T MA2. If you are not sure which one your bike needs, tell our specialists the make, model and how you ride, and they will confirm the right oil before you buy.

Genuine XADO, straight from the source

Every can comes directly from XADO and arrives sealed. Our Nairobi service centre can also do the oil change for you.

You spent good money on the power. One litre makes sure you keep it.

How to use

Check your owner’s handbook for the oil grade and how much the engine holds. Use this oil only where the manufacturer allows a 10W-60.

Warm the engine for a few minutes, switch it off, then drain the old oil and change the oil filter. Pour in XADO 10W-60 4T MA and check the level through the sight glass or on the dipstick. Run the engine for a minute, switch off, wait, and check again.